Welcome Back

Sign in to your PART66Online account

or use email
Forgot password?

Don't have an account? Register here

Q&A Forum

1131 questions found

Module 11. Aeroplane aerodynamics, structures and systems

112.1 MHz is what frequency?

  • UHF
  • ILS
  • VOR
bravo asking:

i thought ILS has odd tenths,any assistance please.

Module 11. Aeroplane aerodynamics, structures and systems

112.1 MHz is what frequency?

  • UHF
  • ILS
  • VOR
bravo asking:

ILS has odd tenths

Module 2. Physics

A body starting from rest accelerates at the rate of 20 metres per second squared. What is the distance covered until the body reaches a velocity of 50 metres per second?

  • 6.25 metres.
  • 25.0 metres.
  • 62.5 metres.
gav_18s asking:

which equation for this?

Module 2. Physics

A drive shaft has a speed 150pi radians a second. What is the speed in RPM?

  • 4500.
  • 9000.
  • 1500.
gav_18s asking:

Someone please explain?

Module 3. Electrical fundamentals

A generator supplies 150VAC phase and load is 10 Ohms per phase. What is the phase current ?

  • 25.5 A.
  • 1.5 A.
  • 15 A.
watzz asking:

How to work out please

Module 3. Electrical fundamentals

What is the phase difference in a circuit with 100V, drawing 0.5 amps, consuming 50 Watts?

  • 0degrees.
  • 45degrees.
  • 90degrees.
watzz asking:

How to do this?

Module 8. Basic aerodynamics

If an aircraft is yawing to the left, where would you position the trim tab on the rudder?

  • To the centre.
  • To the left.
  • To the right.
Ielgazali asking:

this is wrong. it will move to the right

Module 1. Mathematics

The graph points (9, 3) and (3, 1) what is the slope?

  • 9/5
  • 1/3
  • 3/1
hitman asking:

How you find this???

Module 7. Maintenance practices

To replace one 1/8 inch rivet

  • three 1/16 inch rivets would be required.
  • two 1/16 inch rivets would be required.
  • four 1/16 inch rivets would be required.
airmech932 asking:

I know of no such procedure where this method would be employed please explain

Module 15. Gas turbine engine

With bleed valves open for anti-ice

  • thrust is unaffected.
  • thrust decreases, fuel consumption decreases.
  • thrust decreases, fuel consumption increases.
diaandrita asking:

Could you please give me some explanation about this, i though when you open bleed valve for anti ice the amount thrust decreases hence engine have to burn more fuel to achieve same thrust before bleed valve is opened

Module 1. Mathematics

(6 - 2) - (6 - 9) / (-3 + (-3))

  • 3 1/2.
  • 4.
  • 4 1/2.
davidjameswatson1991@live.co.uk asking:

hey guys bit confused with this :(

Module 1. Mathematics

Evaluate (3x^2 - 6xy) / (x-2y).

  • Cannot be simplified further.
  • 3x-3y
  • 3x
hitman asking:

how you evaluate this?

Module 15. Gas turbine engine

When the A.P.U is running and pneumatics are on

  • bleed valve is closed, surge valve is open.
  • bleed valve is open, surge valve is closed.
  • bleed valve is open, surge valve is modulating.
ggmu asking:

explanation plz a bit detailed one thanks !!

Module 7. Maintenance practices

When leak testing with a colour contrast field kit, the soak time for a component less than 1/8 in. (3mm) thick would be

  • at least twice the normal required soak time.
  • at least 3 times the normal soak time.
  • at least the standard normal soak time.
simontay asking:

I dont get the question.

Module 15. Gas turbine engine

When reconnecting a H.E.I.U , which cable must be reconnected first?

  • It makes no difference.
  • T before H.T.
  • T before L.T.
praveen asking:

Can anybody explain why?

Module 15. Gas turbine engine

The specific gravity of fuel affects

  • thrust rating.
  • aircraft range.
  • engine efficiency.
praveen asking:

PLEASE EXPLAIN.

Module 15. Gas turbine engine

A ballast resistor is fitted

  • in parallel, to give identical readings for all engines.
  • in series, to give identical resistance values for all engines.
  • in series, to give identical resistance values to all airframes.
praveen asking:

explanation?

Module 15. Gas turbine engine

Turbine engine components are never manufactured by

  • electrical resistance welding.
  • argon arc welding.
  • gas welding.
ggmu asking:

difference in argon arc and gas welding in regards to turbine engine?

Module 3. Electrical fundamentals

A 10 ohm resistor has a 14.14 V peak drop across it. What power is dissipated?

  • 10 W.
  • 19.99 W.
  • 1.414 W.
MridulDev asking:

how?

Module 5. Digital techniques / Electronic instrument systems

In a single mode fibreoptic cable

  • several light wave modes can propagate simultaneously through the cable.
  • the diameter of the cable is dependent on the wavelength of the light used.
  • the distortion of the signal is determined by the total length of cable used.
MridulDev asking:

how is this?

Module 15. Gas turbine engine

During any stabilised running condition, the spill or half ball valve is

  • always varying between fully closed and fully seated.
  • lightly seated.
  • open fully.
ggmu asking:

is it similar to bleed valve?

Module 15. Gas turbine engine

With a fixed throttle in a climb

  • RPM will increase.
  • RPM will remain constant.
  • RPM will decrease.
ggmu asking:

explaination?

Module 5. Digital techniques / Electronic instrument systems

How is the word label 206 written in ARINC 429?

  • Decimal 010110.
  • Octal 01100001.
  • Hex value 0x86.
MridulDev asking:

how?

Module 3. Electrical fundamentals

The average value of 100 volts peak AC is

  • 70.7 volts.
  • 141. 4 volts.
  • 63.7 volts.
davidjameswatson1991@live.co.uk asking:

help please anyone ?

Module 6. Materials & hardware

A plate 10 inches by 5 inches is to be riveted with 3 rows of rivets, with the normal 4D rivet spacing and 2 D edge distance. The rivets are AN460AD4-6. How many rivets are required?

  • 60.
  • 52.
  • 56.
airmech932 asking:

How?

We use essential cookies to keep you signed in, plus anonymous analytics to understand how the site is used. Cookie-based analytics is set only with your consent. See our Privacy & Cookie Policy.