Welcome Back

Sign in to your PART66Online account

or use email
Forgot password?

Don't have an account? Register here

Q&A Forum

1131 questions found

Module 14. Propulsion

In a FADEC system, active control switchover occurs

  • on shutdown.
  • when channels A and B are healthy.
  • on engine startup only.
Crystal asking:

I think the correct answer is ON SHUTDOWN.
I found the below explanation from a different site.
On the CF6 FADEC, each startup uses an alternative channel.But the switch-over occurs on shutdown of the previous run.The reason for this is that the switch-over at start up might interrupt the start-up sequence.

Module 14. Propulsion

What is the pressure increase over one stage of a centrifugal compressor?

  • 5:1
  • 1.2:1
  • 8:1
Crystal asking:

I think the answer is 8:1 because Jeppesen Gas Turbine Powerplant quotes the latest modern centrifugal compressor as having a pressure ratio of 10:1

Module 3. Electrical fundamentals

An autotransformer is

  • primary and secondary coils.
  • primary coil only.
  • primary and secondary coils on single bar.
AHMEDALSHAIN asking:

Why

Module 10. Aviation legislation

Mandatory markings for flight instruments, or placards are annotated in the

  • Aircraft Maintenance Schedule.
  • Flight manual or Certificate of Airworthiness.
  • Aircraft Maintenance Manual.
marcoff asking:

Are in maintenance manual ATA 11 "PLACARDS AND MARKINGS", or not?

Module 10. Aviation legislation

When is a Noise Certificate required to be carried aboard the aircraft?

  • At all times.
  • When flying in UK airspace only.
  • When flying in UK or any EU member state airspace.
marcoff asking:

Why not at all times?

Module 3. Electrical fundamentals

A transformer should always have its

  • primary shorted or off load.
  • secondary shorted or on load.
  • secondary open circuit or on load.
chandra.shrestha1988 asking:

Shouldn't it be secondary shorted or on load?

Module 5. Digital techniques / Electronic instrument systems

In a CRT, if the magnetic field is parallel to the Y plates, what will be the direction of the electron beam movement?

  • Diagonal.
  • Vertical.
  • Reversed.
bucks asking:

if the magnetic field is parallel to the Y axis why the movement of the beam is not horizontal? i know that the beam have to move in a direction that's perpendicular to the magnetic force lines...is it wrong?

Module 3. Electrical fundamentals

An increase in operating temperature in most electrical devices carrying current results in

  • a decrease in resistance and an increase in current.
  • no effect on the resistance and current.
  • an increase in resistance and a decrease in current.
santro asking:

isnt R inversly proprtion to Temp? Help

Module 3. Electrical fundamentals

The poles of a DC generator are laminated to

  • reduce eddy current losses.
  • reduce flux losses.
  • reduce hysteresis losses.
santro asking:

isnt it eddy current?? Help

Module 9. Human factors

A perforated ear drum could occur if

  • you were exposed to intermittent noise above 25 kHz.
  • you frequently blew your nose with excessive force.
  • you were subjected to continuous noise below 8 kHz.
santro asking:

isnt it normal for 20Hz to 20 Khz?? confused. please clearify

Module 17. Propeller

Thrust and camber faces of a propeller should be blended out to

  • 5 times the depth of damage.
  • 10 times to the depth of damage.
  • 30 times to the depth of damage.
Tsoggos123 asking:

why 30, is not 10?

Module 17. Propeller

The most significant effect of stone chips on a propeller is

  • thrust output of the propeller.
  • structural integrity of the propeller.
  • aerodynamic capability of the propeller.
Tsoggos123 asking:

what is stone chips?

Module 3. Electrical fundamentals

What polarity do interpoles take in a DC motor?

  • Either, provided they lay on the MNA.
  • The same as the next main pole ahead in the direction of rotation.
  • The same as the next main pole behind in the direction of rotation.
Apathy asking:

Can someone explain this?

Module 1. Mathematics

If y/x = 4 and y = 5 then x =

  • 4/5.
  • 1 1/4.
  • 20.
serg20444 asking:

y/x=4, x=4y when y=5 x=20.

Module 11. Aeroplane aerodynamics, structures and systems

Stalling speed in a 15 degrees bank level turn is 60kt. The stalling speed in a 45 degrees bank level turn will be

  • 70 kts.
  • 60 kts.
  • 50 kts.
Malohastaelhueso asking:

How do I calculate stalling speed? Please any help will do thanks

Module 2. Physics

A body drops from 10m, it will hit the ground in

  • square_root(5 seconds).
  • square_root(4 seconds).
  • square_root(2 seconds).
Ptarbin asking:

What formula is used for this?

Module 3. Electrical fundamentals

A 10:1 step up power transformer has 120 V, and 3A flowing through the primary, and 0.285 A flowing through the secondary what is the efficiency?

  • 90%.
  • 95%.
  • 85%.
minnesota asking:

can somebody pls explain that with a formula

Module 1. Mathematics

The Lowest Common Denominator for the problem below is 1/6 + 1/5 + 1/17 + 1/2.

  • 510.
  • 1020.
  • 17.
g13unisol asking:

can anyone show me a quick way to work this out

Module 3. Electrical fundamentals

A conductor with a positive Q (charge) of 4C has 12.56 x 1018 electrons added to it. It will have a Q =

  • 6.
  • 2.
  • 0.
Richiegeee asking:

help?

Module 3. Electrical fundamentals

If a capacitor 1uF and an inductor 10mH are connected in parallel what is their approximate resonant frequency?

  • 1.6 kHz.
  • 62 Hz.
  • 3.2 MHz.
Richiegeee asking:

help?

Module 3. Electrical fundamentals

Three inductors 10 mH, 5 mH and 20 mH are connected in parallel. What is the total inductance?

  • Without knowing the coupling factor the total inductance cannot be found.
  • 2.86mH.
  • 1.35mH.
Richiegeee asking:

help?

Module 3. Electrical fundamentals

In a 4:1 step-up transformer, 120V is applied to the primary, and the load on the secondary is 1600 Ohms. What is the current in the primary?

  • 0.075A
  • 1.2A
  • 3A
Richiegeee asking:

help?

Module 3. Electrical fundamentals

A 24V battery has an internal resistance of 1 ohm. When connected to a load, 12 amps flows. The value of the load is

  • 12 ohms.
  • 1/2 ohm.
  • 1 ohm.
Richiegeee asking:

help?

Module 10. Aviation legislation

Aircraft components require overhauls at times stated in the

  • maintenance schedule.
  • overhaul manual.
  • maintenance manual.
Crystal asking:

Shouldn't it be maintenance schedule since it deals with timings while the manual has maintenance procedures?

Module 3. Electrical fundamentals

The mark-to-space ratio of the waveform shown is

Diagram for question: The mark-to-space ratio of the waveform shown is
  • A to D / D to E.
  • D to E / D to C.
  • A to B / B to C.
subufer asking:

Please explain this one, I don't understand, thank you.

We use essential cookies to keep you signed in, plus anonymous analytics to understand how the site is used. Cookie-based analytics is set only with your consent. See our Privacy & Cookie Policy.