The length of a hose assembly with elbowed end fittings is taken from
- the maximum length of the straight hose portion.
- the extreme overall length of the assembly.
- the centre of the bore at the nipple extremity.
Explanation from PART66Online
For a hose with elbowed (angled) end fittings, the assembly length is measured to the centre of the bore at the extremity of each nipple, giving a consistent reference at the fluid path. Taking the extreme overall length or just the straight portion would not correspond to the standard dimensioning of the fitting.
J
JanathNalaka asked · 14 Feb 2012
The length of a hose assembly with elbowed end fittings is taken from??? please explain it??
Community Comments (1)
P
PART66Online
14 Feb 2012
Please Sign In to post a comment.
More discussions in 7. Maintenance practices
- When manufacturing aircraft control cables, the cable can be cut by
- The sharpest bend that can be placed in a piece of metal without critically weakening the part is called the
- An aircraft has been reweighed and a new report certified. Where does the superseded report belong?
- When using a D.T.I. to check the run-out of a shaft, readings of -15 to +25 would indicate a run-out of
- Galvanic corrosion refers to a type of
- When leak testing with a colour contrast field kit, the soak time for a component less than 1/8 in. (3mm) thick would be