Two basic types of turbine blades are
- impulse and vector.
- reaction and impulse.
- tangential and reaction.
Explanation from PART66Online
The two basic principles of turbine blading are impulse, where the gas changes direction at constant passage area with no pressure drop across the rotor, and reaction, where the gas expands and accelerates through convergent blade passages to generate a reactive force. Most blades combine the two, but reaction and impulse are the basic types; vector and tangential are not.
N
nikunjaviator asked · 26 Dec 2011
two basic type of turrbine blades are
Community Comments (2)
P
PART66Online
26 Dec 2011
Hello nikunjaviator.
Two basic types of turbine blades are reaction and impulse, as marked. :)
en.wikipedia.org/wiki/Turbine#Theory_...
Two basic types of turbine blades are reaction and impulse, as marked. :)
en.wikipedia.org/wiki/Turbine#Theory_...
K
ketkimapzoom
20 Feb 2012
yes it is
Please Sign In to post a comment.
More discussions in 15. Gas turbine engine
- An exhaust cone placed aft of the turbine in a jet engine will cause the pressure in the first part of the exhaust duct to
- The velocity of supersonic air as it flows through a divergent nozzle
- Operating thrust reversers at low ground speeds can sometimes cause
- The primary purpose of the abradable lining in the fan case is to
- The primary purpose of the abradable lining in the fan case is to
- Kerosene will burn effectively at an air/fuel ratio of