Avdel rivets are closed by
- a broaching process.
- a tapered mandrel.
- a squeezing process.
Explanation from PART66Online
Avdel rivets are set by the tool pulling the stem so a hardened portion of the stem is drawn (broached) through the rivet bore, expanding the shank to form the blind head and locking the joint. This broaching action distinguishes them from rivets closed by a simple tapered mandrel or by a squeezing/upsetting process.
M
Mukesh Kumar asked · 1 Aug 2012
broaching process ?
Community Comments (0)
No one has posted a comment here yet.
Please Sign In to post a comment.
More discussions in 7. Maintenance practices
- When checking a torque wrench 15 inches long, the load required to give torque of 120 lbs.in. is
- At which frequency is the calibration of frequently used crimping tools carried out?
- The picture shows a torque wrench with an extension. To apply a torque of 350 lb.in. the reading on the dial should be
- A micro-shaver is used to
- When torque loading, a wrench should be selected where the required value falls
- A 3 1/2 bit multimeter will indicate readings up-to