A micro-shaver is used to
- cut rivets to the required length before forming.
- mill the rivet head after forming.
- trim the rivet shank diameter before installation.
Explanation from PART66Online
A micro-shaver is a controlled-depth cutter used after riveting to mill a protruding (often flush) rivet head down to the required height, producing a smooth, aerodynamically clean surface. It works on the formed head, not on cutting the rivet to length or trimming the shank before installation.
M
Mukesh Kumar asked · 1 Aug 2012
What is Mill the revit Head?.
Community Comments (1)
O
obrien99
5 Aug 2012
milling the rivet head is shaving the rivet head after formation so it is flush with surrounding skin. if you google this process there will be plenty of info
Please Sign In to post a comment.
More discussions in 7. Maintenance practices
- When torque loading, a wrench should be selected where the required value falls
- A 3 1/2 bit multimeter will indicate readings up-to
- What does the cut of a file refer to?
- A crimped electrical connection is suspected to be high resistance. How would you verify this without disconnecting the circuit?
- The damping force in a meter
- A thread on a drawing is labeled 1/2-20 UNF - 1B. The thread is