How is the MLG retract actuator accessed for maintenance?
- Through a panel in the trailing edge
- Through an access door in the wheel well ceiling
- Through a panel in the bottom of the fuselage
S
stevegrafe asked · 2h ago
Reference for this answer?
The answer of rovided is not specific to the point.
Community Comments (1)
P
PART66Online
23m ago
Hello,
Thanks for your question. The marked answer is correct. According to the 787 manufacturer documentation, the MLG retract actuator is in the aft bottom of the wing, outboard of each main gear, and is accessed through the inboard trailing edge lower panel of the wing. It is not reached through the wheel well ceiling or the bottom of the fuselage.
Thanks for your question. The marked answer is correct. According to the 787 manufacturer documentation, the MLG retract actuator is in the aft bottom of the wing, outboard of each main gear, and is accessed through the inboard trailing edge lower panel of the wing. It is not reached through the wheel well ceiling or the bottom of the fuselage.
Please Sign In to post a comment.
More discussions in 32 - Landing Gear, Wheels & Brakes
- A hydraulic jack has a piston rod (ram) on one side of the piston only. Fluid at equal pressure is applied to both sides of the piston. What happens?
- Helicopter fibreglass panels are protected against lightning strikes, partially by
- A heat pump:
- On an aircraft with an all-moving tailplane, pitch up is caused by
- Retreating blade stall symptoms in a helicopter typically include:
- How would you test a hydraulic hose?