The steepest slope permitted on the scarf of a scarfed plywood repair is
- 1 in 20.
- 1 in 4.
- 1 in 12.
Explanation from PART66Online
A scarf joint in plywood relies on a long, shallow glued taper to develop full bond strength, so the steepest slope permitted is about 1 in 12. A steeper slope such as 1 in 4 gives too little bonding area and would fail, while 1 in 20 is shallower than required.
A
aero turk asked · 31 Oct 2015
I don't understand what is a scarf of a scarfed plywood
Community Comments (2)
P
PART66Online
1 Nov 2015
Hi.
Please check this picture: bloximages.chicago2.vip.townnews.com/...
This should clear everything.
Please check this picture: bloximages.chicago2.vip.townnews.com/...
This should clear everything.
A
avionics
2 Apr 2017
scarf2
skɑːf/
verb
verb: scarf; 3rd person present: scarfs; past tense: scarfed; past participle: scarfed; gerund or present participle: scarfing
1.
join the ends of (two pieces of timber or metal) by bevelling or notching them so that they fit over or into each other.
skɑːf/
verb
verb: scarf; 3rd person present: scarfs; past tense: scarfed; past participle: scarfed; gerund or present participle: scarfing
1.
join the ends of (two pieces of timber or metal) by bevelling or notching them so that they fit over or into each other.
Please Sign In to post a comment.
More discussions in 6. Materials & hardware
- When does an aircraft fabric covering repair become a major repair?
- Where the edge of a new fabric section will be located within 1 inch of a structural member to which the fabric is attached by rib lacing or other methods, the new fabric section should
- In corrosion, the electrode that loses electrons is
- Electrochemical reaction is caused by the contact of
- Galvanic action caused by dissimilar metal contact may best be prevented by
- Galvanic action caused by dissimilar metal contact may best be prevented by