Where the edge of a new fabric section will be located within 1 inch of a structural member to which the fabric is attached by rib lacing or other methods, the new fabric section should
- be extended 3 inches past the structural member.
- be extended to meet the structural member.
- be designated a major repair.
Explanation from PART66Online
Where a new fabric section ends within an inch of a rib or other member that the fabric is laced to, the cloth is carried at least about 3 inches past that member. This ensures the seam and lacing land on supported structure rather than in an unsupported, weak position right at the joint.
C
cpster asked · 29 Jan 2014
this is wrong answer should be "be extended 3 inch past the structure member"
Community Comments (1)
P
PART66Online
31 Jan 2014
Hey!
You right, question is corrected, thanks!
You right, question is corrected, thanks!
Please Sign In to post a comment.
More discussions in 6. Materials & hardware
- In corrosion, the electrode that loses electrons is
- Electrochemical reaction is caused by the contact of
- Galvanic action caused by dissimilar metal contact may best be prevented by
- Galvanic action caused by dissimilar metal contact may best be prevented by
- The lifting or flaking of the metal at the surface due to delamination of grain boundaries caused by the pressure of corrosion is
- Intergrannular corrosion in structural aluminium alloy parts