MS20426AD-6-5 indicates a countersunk rivet which has
- a shank length of 5/16 inch (excluding head).
- an overall length of 5/16 inch.
- a shank length of 5/32 inch (excluding head).
Explanation from PART66Online
MS20426 is a 100-degree countersunk (flush) rivet. For countersunk rivets the length figure is the overall length measured including the head, since the head sits within the sheet. Here the second dash number 5 means 5/16 inch overall, not a shank length excluding the head.
D
deven asked · 16 Jul 2015
plz teach me how ?
Community Comments (2)
H
hones007
21 Jul 2015
6-5 means a diameter of 6/32's and a length of 5/16ths. Diameter first number in 32nds and length second number in 16ths.
D
deven
24 Jul 2015
Thanks hones007
Please Sign In to post a comment.
More discussions in 6. Materials & hardware
- A square around the NW digit in the quadrant of a fastner would indicate
- Hydraulic pipes are made from
- The material specifications for a certain aircraft require that a replacement oil line be fabricated from3/4 inch, 0.072 5052-0 aluminium alloy tubing. What is the inside dimension of this tubing?
- Excessive stress on fluid or pneumatic metal tubing caused by expansion and contraction due to temperature changes can best be avoided by
- A 0.5 in. diameter pipe is to be joined using standard nuts and fittings. What coupling would you use?
- What load are spring hooks subjected to?