The output from a rotating armature AC generator would be taken from
- either the rotor or the stator.
- the rotor.
- the stator.
Explanation from PART66Online
In a rotating-armature machine the output (armature) windings are on the rotor, so the generated voltage is taken from the rotor through slip rings or a commutator. This contrasts with the more common revolving-field design, where the output comes from the stator and only the field is on the rotor.
S
Shawez asked · 11 Feb 2015
i cant understand the difference between output and output windings,
some questions mention output is from rotor and others output windings from stator.Am confused!!
Community Comments (1)
S
sjklm007
5 Sep 2015
...
Please Sign In to post a comment.
More discussions in 3. Electrical fundamentals
- A generator supplies 150VAC phase and load is 10 Ohms per phase. What is the phase current ?
- A 3 phase generator whose phase and line voltages are different is connected in
- The Stability windings in a 3 phase AC generator are to sense
- The line voltage of a 3 phase star connected AC generator is
- The instantaneous value of the EMF induced in a rotating wire loop is
- The diagram shows a 200V short shunt compound generator. What is the voltage across the series field resistance?