Two inductive coils are placed in close proximity with each other at 90 degrees. The number of flux linkages is
- 0.
- maximum negative.
- maximum positive.
Explanation from PART66Online
Mutual flux linkage depends on the cosine of the angle between the coil axes. With the coils set at 90 degrees the flux from one coil runs parallel to the plane of the other, so no flux threads it and the linkage is zero. Maximum linkage would occur only when the coils are coaxial.
A
arifadli8 asked · 6 Jan 2014
explain..
Community Comments (1)
P
PART66Online
9 Jan 2014
The coils must be parallel for maximum flux linkages. Coupling factor reduces as angular difference increases.
Please Sign In to post a comment.
More discussions in 3. Electrical fundamentals
- What is the mutual inductance if two coils of 10mH and 500mH have 90% of the flux transferred from one to the other?
- An inductor has 1,000 turns of wire and a cross sectional area of 0.001m2. If the core has a permeability of 0.000,001 and the coil is 0.1m. What is the value of the inductor?
- Three inductors 10 mH, 5 mH and 20 mH are connected in parallel. What is the total inductance?
- If the current reaches a maximum through an inductor of 2A in 15 seconds, what is the current after 3 seconds?
- An AC inductive circuit has an inductance of 10 mH and a frequency input of 1000Hz. The opposition to current flow is approximately
- An inductor of resistance 5 kO and inductance 2mH is connected to a DC circuit. The time constant is