Q&A Forum
1118 questions found
If a QFE is set at an airfield and flown to another airfield at the same level above sea level then
- it will probably not need resetting and will read zero
- it will display the airfield height above sea level
- it will not need resetting and will read zero
Jordi asking:
what is the purpose of the 2 answers here?They are basically the same apart from the word "probably" .
To improve the image or picture when using the WRX (weather radar receiver)
- use longer bursts
- use shorter bursts
- scan at a lower rate
Jordi asking:
i think this is wrong my notes from my academy say 'scan at lower rate" .
The versine signal is used in the
- pitch and roll channel
- roll channel only
- pitch channel only
Jordi asking:
This is wrong,versine is for roll channel only.
What does a trim tab do?
- Provides finer control movements by the pilot
- Allows the C of G to be outside the normal limit
- Eases control loading for pilot
Jordi asking:
shouldn't this be servo tab?.The servo tab eases the loading.
Sweepback increases Mcrit by
- decreasing the amount of airflow over the lowest point on the aerofoil section.
- decreasing the amount of airflow over the highest point on the aerofoil section.
- increasing the amount of airflow over the highest point on the aerofoil section.
Matteo123 asking:
Please write your question here.